Friday, 22 May 2015

A simple tool takes the guess work — and a lot of the brain work — out of making safe comfortable stairs.

A simple tool takes the guess work — and a lot of the brain work — out of making safe comfortable stairs.

Every time I’m asked to bid or to build a set of stairs, I unroll the plans, look at the details, and shake my head. Architects rarely include and often they don’t even have the basic information I need, the few specifications that allow me to build a staircase that will meet the stringent requirements of building code in my area.


Before I can layout a set of stairs, I need to know the exact thickness of the finish floors, including the floors at the top of the stairs, at the bottom of the stairs, as well as on any intermediate landings. I also need to know the run of the stairs—exactly where the architect wants the stairs to start on the first floor and finish on the second, third, fourth, or fifth. And finally, I need to know the exact thickness of the finish treads. Once I have that information, I can make a story pole that allows me to build a stair with confidence that’s dead accurate, never once stopping to scratch my head over the calculations.

A story pole: Every measurement on a stick

Before I describe the layout process, I can’t stress enough the importance for every step of a staircase to be exactly the same height; a 1/4-in. difference between steps can be dangerous if not fatal. And with all the factors that go into a set of stairs, it’s very easy to make a mistake in layout or construction, which can throw off the consistency of the rises.
As with all my finish carpentry, I follow two rules that make my staircases accurate and right: First, I design and layout the work completely before I build it. Second, I start with the finish and work back to the rough.
For complicated projects, a fullscale drawing or loft always works best. (I never depend on the architects 1/4-in. scale drawing—It’s not nearly accurate enough for stair building). But for most of the stairs I build, I just make a story pole, a crucial tool for precision stair building.

A story pole is basically a full-size elevation drawing shrunk down into one dimension—a line, in this case a 1×4 stick. I start by making field measurements, the first of which is the floor-to-floor height from where the stair will start—about the middle of the first riser location—to where the stair will end—about the middle of the top riser.

Credit by thisiscarpentry

Wood Identification Kit

Monday, 18 May 2015

A Great Carpenter

A skilled carpenter can build an array of items from wood. The profession of carpentry is an ancient and rewarding one. These professionals can turn lumber into homes, furniture, cabinetry and b...




A skilled carpenter can build an array of items from wood. The profession of carpentry is an ancient and rewarding one. These professionals can turn lumber into homes, furniture, cabinetry and boats. Timber and tools can come together in order to be transformed in a myriad of ways. This craftsman must have a treasure trove of skills, knowledge, vision and creativity. Not all carpenters, however, are the same. Many are classified by their specialization.
Some specialties include:

Framers: These workers get their name by their duties of framing houses and commercial structures. The frame of a building is much like a body’s skeleton. It is the backbone and the foundation of all the other components. A framer must be competent with measuring, sawing, leveling, hammering and reading blueprints and plans.

Finish carpenters: These wood workers focus on refined finish work that has detail and finesse. This is not a slap dash methodology but rather the final touches. Finish pros work on items such as furniture, floorings’ parquet design, structural models, musical instruments and toys. An artistic flair and exactitude is required for this segment of pros.

Cabinetmakers: Cabinetmakers must be able to put timber together not only beautifully but functionally, as well. Shelves, cupboards and drawers all fall into the classification to be made by cabinetmakers. Doors and drawers must fit exactly, in order to be able to open, close and slide effortlessly.

Trim Carpentry: Trim work is a specialty within itself. There is a certain knack to baseboards, crown molding, fireplace mantles, window and door trimming that requires a steady hand and good eye. Without this professional’s touch, buildings would look unfinished and sloppy.

Ship Carpenters: Boats and ships require a certain kind of timber working technology in order to make components sea worthy. These professionals must be properly trained in every aspect of “sink and float” mechanics.

Carpenters have been around for eons but the structures, tools and materials they work with have continued to evolve and change over the years. Tools have been redesigned to be ergonomically correct in order to protect physical well being; they have evolved to be more streamlined and powerful, as well.

Timber products have changed over the years, too. Because earth’s natural resources, including wood, are being depleted, those in the lumber trade are coming up with greener ways to produce wooden products without robbing the earth of all forests. Some examples are manufactured lumber, compressed wood by-products, fast growing timber such as bamboo and the practice of using reclaimed or recycled wood products from old salvaged buildings. Not only does this recycled material help our planetFeature Articles, it also gives personality to the products made from it. Many cool floors and furnishings have been made from old pickle and whiskey vats or the side of great-granny’s barn.

These professionals aren’t just born knowing how to build. Many learn from family members who were craftsmen and women before them and others complete apprenticeships in order to gather experience to become a highly skilled carpenter.

Credit by ArticlesFactory.com